AIDA-America Corp is the only US manufacturer to offer a full range of mechanical stamping presses from 30 to 4000 tons, 15-2,500 spm. With the largest network of manufacturing and sales organizations in the industry, AIDA offers gap, straightside, progressive die, high-speed, transfer systems, and cold forming presses as well as ServoPro® Servoforming technology, press automation and total turnkey packages.
Gap Series
 NC1 Single Point Gap Frame Press - Like all AIDA® NC-series gap frame presses, the NC1 Single Point Gap Frame Press uses a welded steel frame, cast iron slide, and over-sized cast steel bolsters. This enables the press to deliver angular frame deflection that is one third of the industry standard, insuring longer die life and higher part quality.
Press Features
- Six-point flat gibbing of the cast iron slide ensures precision guiding
- Fastest hydraulic overload protection system in the industry, HOLP
- Air actuated wet clutch and brake
- Flywheel brake standard
- Power slide adjustment with locking system
- AIDA E-Series Control
- Adjustable air counterbalance system
- Up to 30% Less Angular Deflection Under Load
- 35 to 250 metric tons
NC2 Double Crank Gap Frame Press – AIDA NC gap-frame presses routinely
perform progressive and transfer press die work normally reserved for
straightside presses, at a substantial savings.
Press Features
- Two-point counter-rotating crank shaft system reduces side thrust
- Six-face slide gib structure minimizes front-to-back and left-to-right
movement
- Up to 30% Less Angular Deflection Under Load
- Fastest hydraulic overload protection system in the industry, HOLP
- Air actuated wet clutch and brake
- Minimal overall clearances to reduce the effects of breakthrough
- 110 to 250 metric tons
Straightside Series
NS1 Series Single Point Unitized Frame - Unitized straightside frame construction reduces deflection and enables high-precision forming. The NS1 Series is available in both link motion and crank motion.
Press Features
- Centered and full-length slide guides
- Forced oil lubrication system on the crank bearings and in slide guide area
- Compact design frame reduces installation space
- Reduced frame deflection improves die life and part quality
- Operation panel designed for operability and safety
- Large easy to use touch-screen display
- Fastest hydraulic overload protection system in the industry, HOLP
- 80 to 200 metric tons
 NS2 Series 2 Point Unitized Frame - Unitized straightside frame for minimal frame elongation. The NS2 Series is available in both crank motion and link motion models.
Press Features
- Forced circulation lubrication system
- Centered and full-length slide guides
- Compact design, energy efficient
- Fastest hydraulic overload protection system in the industry, HOLP
- 110 to 300 metric tons
 NSU Series Straightside Unitized Frame - Designed and constructed for easy, low-cost maintenance. Eccentric gear design ideal for high performance dimensional work –
appliance, HVAC, furniture, etc. Rigid, unitized frame for rock-solid durability.
Ball type slide connection. AIDA’s famous Hydraulic Overload Protection is standard.
0.001"/ft. bed and slide deflection rating under full load.
Press Features
- Rigid, unitized frame for rock-solid durability
- Eccentric gear design is ideal for high performance dimension work in the
appliance, HVAC, furniture, hardware and other industries
and the Link Systems Omni Link 5000 are available.
NST Series Straightside Tie Rod Frame - Created to meet your conventional
Stamping press requirements in the most unconventional ways. High-end features with
low-end pricing.
Press Features
- Eccentric gear design ideal for high performance in the production of
appliances, HVAC equipment, furniture, hardware, farm and garden machinery, etc.
- High energy drive for work being done higher in the press stroke.
- Rigid, tie rod frame for reduced deflection under load.
- Hydraulic overload protection (HOLP) is standard.
- Ball type slide connections for reduced clearance and maintenance.
- Pre-loaded roller slide guiding improves die life and part quality.
- ACCESS Control standard, or Honeywell WINTRISS SmartPAC and the Link Systems Omni Link 5000 are available.
- Wide-spaced slide connections
- 300 to 1200 metric tons
 PMX Progressive Die Straightside Press - The PMX series uses AIDA metalforming technology advancements to deliver better total productivity at lower overall costs. AIDA’s unique slide link motion design minimizes heat and vibration found in dies run in
conventional crank or eccentric shaft presses. The slide guiding system helps eliminate slide tipping caused by off-center loading (inevitable in progressive die stamping). Link motion combined with features such as advanced controls, dynamic balancing, rigid frame structure,
and hydraulic overload protection enable the AIDA PMX presses to often double die life.
And some of AIDA’s most popular PMX presses, the 300, 400, and 600 ton models, are
available through a short delivery program, allowing customers to take advantage of AIDA stamping press technology quicker.
Press Features
SMX Double Crank Straightside Press - The AIDA SMX Series offers double crank straightside rigidity and the accuracy and reliability required for the automotive,
appliance, furniture or any other industry that involves massive parts and
corresponding stroke lengths.
Press Features
capability
- Tie-rod tightened frame, increasing rigidity and precision
- Eight-point square slide guide that limits lateral and longitudinal movement
- Minimal overall clearance to reduce the occurrence of breakthrough
- Overload protector utilizing an advanced metal seal design, offering fast response time for protecting your tooling & press
- Wet-type clutch/brake for less friction disc wear
- AIDA® ACCESS Control
- 300 to 2000 metric tons
Transfer Series
 TMX Large Capacity Transfer Press - The TMX series builds on AIDA’s strength
in manufacturing transfer presses of various sizes. With high capacity to handle a
wide range of applications, the TMX is custom designed to customer
specifications, and can include a link drive for deep draw and forming
applications.
Press Features
transverse movement
- Fastest hydraulic overload protection system in the industry, HOLP
- Minimal overall clearance derived from high-precision components
- Wide suspension point spacing
- AIDA® ACCESS Control
- 300 to 4000 metric tons
ULX Precision Press - The first industry design where the stamping press is more
accurate than the die.
Press Features
- Revolutionary 9 point support system
- Single-point, center suspension, no con rod design
- Ideal for progressive, transfer and near fine blanking stamping press
operations
- Innovative design with 18 patents pending
- 160 to 600 metric tons
 Specifications
High-Speed Series
HMX - The AIDA HMX offers dramatic improvements in areas directly linked
to productivity and profits – accuracy, maintenance, reliability and costs. These
factors are actually sacrificed by the design of the adjustable stroke presses currently
available. With superior construction and the absence of any accuracy-robbing stroke
adjustment mechanisms, the HMX delivers unsurpassed accuracy and die life with the
lowest deflection characteristics of any available high-speed press. Thermal cooling control ensures that operating temperatures remain consistent for precise BDC control and accurate
part production.
Press Features
- Highly rigid frame
- Dynamic balancer
- Slide adjustment
- Hydraulic stick release device / Slide lock system
- Roll cam feed (optional)
- Oil tempature control / Oil tank
- Anti-vibration mounts
- 8 point slide guide
- 125 to 400 metric tons
MSP - Advancing to an even higher stage with the AIDA MSP Series. With the
MSP press, dynamic accuracy is significantly improved because of the compact
design and multiple suspension points.
Press Features
- Multiple Suspension
- Twin Drive
- Caliper Type Clutch and Brake
- Highly Rigid Frame
- Highly Ridid Guidepost
- 20 to 30 metric tons
 LINX - The LINX stamping press is a high-speed press, link type, fixed stroke, for the production of electronic components. Precision knuckle motion increases productivity,
assures stable production, increases product accuracy, extends die life, reduces noise,
and minimizes die sticking.
Press Features
- Knuckle motion
- Compact design
- Non-backlash separate type clutch and brake
- Easy to see color display
- Production data bank system
- 35 to 250 metric tons
 EXIO - The AIDA EXIO's variable stroke knuckle motion best suits production of
diversified parts.
Press Features
- Variable Stroke Length
- Knuckle Motion
- Production Data Bank System
- 30 to 80 metric tons
SONIC - The compact design of the SONIC makes it possible to reduce the volume of
the press body in comparison with conventional presses. Reducing both initial and
running costs, this stamping press displays its power with super-high-speed processing
of small precision items in the electronic parts field for the electronic devices and
equipment that support the IT era.
Press Features
- Improvement of dynamic accuracy
- Hydraulic suspension
- Short distance between the feeder and the die
- 10.4 inch color display
- Die protection device
- 30 metric tons, up to 2500 spm
DEL-300 - High-speed press with fixed stroke, drop away bolster, for production
of electronic components, 30 metric tons, up to 1,500 spm
 AXEL - Superior performance and compact design that save not only space but
reduce initial and running costs, especially electric power. Profitable production of
small intricate parts requiring extreme accuracy and uniformity.
Press Features
- High Performance
- Space saving and energy saving
- Operator friendly
- 30 to 40 metric tons
ServoPro® Servoforming Presses
Gap Frame Press Single Point with ServoPro® Technology – ServoPro
technology is the first fundamental change in the forming industry in more than
30 years. The key is the high torque/low RPM servomotors–big motors–designed
and built by AIDA specifically for press applications. Connected directly to the
crank, they provide the precise accuracy and reliability you expect of AIDA.
Completely programmable stroke. Unlimited flexibility of part runs.
Press Features
- High torque/Low RPM servomotors
- Completely programmable stroke
- Ultimate flexibility of part runs
- 80 to 250 metric tons
Straightside Press Single Point with ServoPro Technology
Press Features
- Highly accurate & efficient process for difficult-to-form material
- Improved productivity
- Eliminate noise and vibration during forming
- Improved operability and maintainability
- Unique Safety feature
- 80 to 200 metric tons
|
